I-280/I-880/Stevens Creek Boulevard
Interchange Improvements Project
May 27, 2015
Final Paving Begins at Stevens Creek/I-280 Interchange
Final paving of a rubberized asphalt will begin Thursday night throughout the project area, with an estimated six nights of work need to pave both Stevens Creek Boulevard and each of the affected on- and off-ramps. This work is dependent on a minimum overnight temperature of 55 degrees.
Stevens Creek Boulevard will be paved between the Monroe/Stevens Creek Boulevard intersection past the on- and off-ramps east of the freeway. Each of the ramps to or from I-280, I-880 and SR 17 will also be paved.
Crews will work from 10 p.m. until 5 a.m. the following morning. This is the tentative schedule, which is subject to change:
|Thursday, May 28||--NB I-280 to NB I-880 flyover|
|Friday, May 29||--NB SR 17 and NB I-280 to Stevens Creek ramps|
|Sunday, May 31||
--SB I-880 to Stevens Creek off-ramp
|Monday, June 1||--EB Stevens Creek boulevard to NB I-880 on-ramp,
--SB I-280 to NB I-880 ramp
--any remaining work on the on-ramp from WB Stevens Creek Boulevard to SB SR-17,
|Tuesday and Wednesday, June 2 and 3||--Stevens Creek Boulevard|
Final paving is typically done near the end of the project and the I-280/I-880/Stevens Creek Boulevard Interchange Improvements Project is nearly complete.
Expect multiple lane and ramp closures during this work. Standard detours will be in effect. Traffic signals in this area will also revert to timed operation (rather than on-demand or programmed operation) for a period of up to two weeks as final striping takes place and traffic-detecting loops are installed in the roadway.
Questions or concerns regarding this project should be directed to VTA Community Outreach at (408) 321-7575 or firstname.lastname@example.org. To sign up for e-mail updates, visit www.vta.org/280880stevenscreek and click on the blue envelope icon found in the upper right-hand corner of the page.